In a beam subjected to pure bending, the intensity of stress in any fibre is

Related MCQs

• A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The maximum normal stress will be
• The bending moment diagram for a cantilever beam subjected to bending moment at the end of the beam would be
• A shaft of diameter D is subjected to a twisting moment (T) and a bending moment (M). If the maximum bending stress is equal to maximum shear stress developed, then M is equal to
• A rectangular beam 200 mm deep by 100 mm wide-subjected to maximum bending moment of 500 kNm. The maximum stress in the beam will be
• In a beam of uniform strength, the bending stress developed is constant and is equal to the allowable stress at every section of the beam.
• When a beam is subjected to bending moment, the stress at any point is
• The bending moment at a section tends to bend or deflect the beam and the internal stresses resist its bending. The resistance offered by the internal stresses, to the bending, is called
• A section of beam is said to be in pure bending, if it is subjected to
• In case of a beam subjected to pure bending
• In a thick cylindrical shell subjected to an internal pressure (p), the tangential stress is always a tensile stress where as the radial stress is a compressive stress