The number of clock pulses needed to shift one byte of data from input to the output of a 4-bit shift register is

Related MCQs

• A bidirectional 4-bit shift register is storing the nibble 1110. Its input is LOW. The nibble 0111 is waiting to be entered on the serial data-input line. After two clock pulses, the shift register is storing .
• In Q output of the last flip-flop of the shift register is connected to the data input of the first flip-flop of the shift register.
• In Q output of the last flip-flop of the shift register is connected to the data input of the first flip-flop of the shift register.
• 8: A JK flip-lop has its J input connected to logic level 1 and its input to the Q output. A clock pulse is fed to its clock input. The flip-lop will now
• A 8-bit serial in / parallel out shift register contains the value “8”,           clock signal(s) will be required to shift the value completely out of the register.
• A 8-bit serial in / parallel out shift register contains the value “8”,           clock signal(s) will be required to shift the value completely out of the register.
• AT T0 THE VALUE STORED IN A 4-BIT LEFT SHIFT WAS “1”. WHAT WILL BE THE VALUE OF REGISTER AFTER THREE CLOCK PULSES?
• At T0 the value stored in a 4-bit left shift was “1”. What will be the value of register after three clock pulses?
• A J-K lip-lop has its J-input connected to logic level 1 and its input to the Q output pulse is fed to its clock input the flip-flop will now
• We have a digital circuit. Different parts of circuit operate at different clock frequencies (4MHZ, 2MHZ and 1MHZ), but we have a single clock source having a fix clock frequency (4MHZ), we can get help by