A TTL totem-pole circuit is designed so that the output transistors:

Related MCQs

• A TTL NAND gate with IIL(max) of –1.6 mA per input drives eight TTL inputs. How much current does the drive output sink?
• It is best not to leave unused TTL inputs unconnected (open) because of TTL's
• One advantage TTL has over CMOS is that TTL is
• Ten TTL loads per TTL driver is known as:
• What causes low-power Schottky TTL to use less power than the 74XX series TTL?
• A standard TTL circuit with a totem-pole output can sink, in the LOW state (IOL(max)),
• The commercially available 8-input multiplexer integrated circuit in the TTL family is
• In a TTL circuit, if an excessive number of load gate inputs are connected,
• he problem of the VOH(min) of a TTL IC being too low to drive a CMOS circuit and meet the CMOS requirement of VIH(min) is usually easily overcome by:
• As a technician you are confronted with a TTL circuit board containing dozens of IC chips. You have taken several readings at numerous IC chips, but the readings are inconclusive because of their erratic nature. Of the possible faults listed, select the one that most probably is causing the problem.