Which of the following gates are added to the inputs of the OR gate to convert it to the NAND gate ?

Related Questions

• An output gate is connected to four input gates; the circuit does not function. Preliminary tests with the DMM indicate that the power is applied; scope tests show that the primary input gate has a pulsing signal, while the interconnecting node has no signal. The four load gates are all on different ICs. Which instrument will best help isolate the problem?
• What is the minimum number of two-input NAND gates used to perform the function of two input OR gate ?
• The NAND gate output will be low if the two inputs are
• A TTL NAND gate with IIL(max) of –1.6 mA per input drives eight TTL inputs. How much current does the drive output sink?
• What should be done with unused inputs to a TTL NAND gate?
• NAND. gates are preferred over others because these
• What is the minimum number of 2 input NAND gates required to implement the function F = (x'+y') (z+w)
• The output of a logic gate is 1 when all its inputs are at logic 0. the gate is either
• How many two input AND gates and two input OR gates are required to realize Y = BD+CE+AB
• If the region beneath the gate is left initially uncharged the gate field must induce a channel before current can flow. Thus the gate voltage enhances the channel current and sucha device is said to operate in the