When an open occurs on the input of a CMOS gate, the output will .

Related MCQs

• An output gate is connected to four input gates; the circuit does not function. Preliminary tests with the DMM indicate that the power is applied; scope tests show that the primary input gate has a pulsing signal, while the interconnecting node has no signal. The four load gates are all on different ICs. Which instrument will best help isolate the problem?
• The inverter OR-gate and AND gate are called deeision-making elements because they can recognize some input while disregarding others. A gate
• An open-drain gate is the CMOS counterpart of
• If the region beneath the gate is left initially uncharged the gate field must induce a channel before current can flow. Thus the gate voltage enhances the channel current and sucha device is said to operate in the
• THE FOUR OUTPUTS OF TWO 4-INPUT MULTIPLEXERS, CONNECTED TO FORM A 16-INPUT MULTIPLEXER, ARE CONNECTED TOGETHER THROUGH A 4-INPUT                   GATE
• which of the following rules states that if one input of an AND gate is always 1, the output is equal to the other input?
• he problem of the VOH(min) of a TTL IC being too low to drive a CMOS circuit and meet the CMOS requirement of VIH(min) is usually easily overcome by:
• A logic probe is placed on the output of a gate and the display indicator is dim. A pulser is used on each of the input terminals, but the output indication does not change. What is wrong?
• The output of a logic gate is 1 when all its inputs are at logic 0. the gate is either
• If ICCH is specified as 1.1 mA when VCC is 5 V and if the gate is in a static (noncharging) HIGH output state, the power dissipation (PD) of the gate is