- Computer Science Engineering (CSE)
- Digital Electronics and Logic Design
- A n-stage ripple counter will count up t...

Q. |
## A n-stage ripple counter will count up to |

A. | 2n |

B. | 2n-1 |

C. | n |

D. | 2n-1 |

Answer» A. 2n |

View all MCQs in:
Digital Electronics and Logic Design

- Consider an up/down counter that counts between 0 and 15, if external input(X) is “0” the counter counts upward (0000 to 1111) and if external input (X) is “1” the counter counts downward (1111 to 0000), now suppose that the present state is “1100” and X=1, the next state of the counter will be
- 41: In a ripple counter using edge triggered JK flfp-flops, the pulse input is applied to the
- A mod-2 counter followed by a mod-5 counter is
- With the use of an electronic counter six capsules are to be filled in bottles automatically. In such a counter what will be the number of flip- flops required ?
- In which of the following adder circuits, the carry look ripple delay is eliminated ?
- The 7447A is a BCD-to-7-segment decoder with ripple blanking input and output functions. The purpose of these lines is to .
- The carry output of each adder in a ripple adder provides an additional sum output bit.
- 2: The number of flip-flops required in a modulo N counter is
- 4: How many gates (minimum) are needed for a 3-bit up-counter using standard binary and using T lip-lops ? Assume unlimited fan-in.
- What is the maximum counting speed of a 4-bit binary counter which is composed of flip-flops with a propagation delay of 25 ns ?

Login to Continue

It will take less than 2 minutes

Report MCQ