If in a shift resistor Q0 is fed back to input the resulting counter is

Related MCQs

• Consider an up/down counter that counts between 0 and 15, if external input(X) is “0” the counter counts upward (0000 to 1111) and if external input (X) is “1” the counter counts downward (1111 to 0000), now suppose that the present state is “1100” and X=1, the next state of the counter will be
• 8: A JK flip-lop has its J input connected to logic level 1 and its input to the Q output. A clock pulse is fed to its clock input. The flip-lop will now
• A J-K lip-lop has its J-input connected to logic level 1 and its input to the Q output pulse is fed to its clock input the flip-flop will now
• A bidirectional 4-bit shift register is storing the nibble 1110. Its input is LOW. The nibble 0111 is waiting to be entered on the serial data-input line. After two clock pulses, the shift register is storing .
• A pull-up resistor is a resistor used to keep a given point in a circuit HIGH when in the active state.
• The number of clock pulses needed to shift one byte of data from input to the output of a 4-bit shift register is
• In Q output of the last flip-flop of the shift register is connected to the data input of the first flip-flop of the shift register.
• In Q output of the last flip-flop of the shift register is connected to the data input of the first flip-flop of the shift register.
• A 8-bit serial in / parallel out shift register contains the value “8”,           clock signal(s) will be required to shift the value completely out of the register.
• A 8-bit serial in / parallel out shift register contains the value “8”,           clock signal(s) will be required to shift the value completely out of the register.