A bidirectional 4-bit shift register is storing the nibble 1110. Its input is LOW. The nibble 0111 is waiting to be entered on the serial data-input line. After two clock pulses, the shift register is storing .

Related Questions

• Assume that a 4-bit serial in/serial out shift register is initially clear. We wish to store the nibble 1100. What will be the 4-bit pattern after the second clock pulse? (Right-most bit first.)
• The number of clock pulses needed to shift one byte of data from input to the output of a 4-bit shift register is
• The input at the 1, 2, 4, 8 inputs to a 4-line to 16-line decoder with active- low outputs is 1110. As a result, output line 7 is driven LOW.
• A 8-bit serial in / parallel out shift register contains the value “8”,           clock signal(s) will be required to shift the value completely out of the register.
• A 8-bit serial in / parallel out shift register contains the value “8”,           clock signal(s) will be required to shift the value completely out of the register.
• 8: A JK flip-lop has its J input connected to logic level 1 and its input to the Q output. A clock pulse is fed to its clock input. The flip-lop will now
• AT T0 THE VALUE STORED IN A 4-BIT LEFT SHIFT WAS “1”. WHAT WILL BE THE VALUE OF REGISTER AFTER THREE CLOCK PULSES?
• At T0 the value stored in a 4-bit left shift was “1”. What will be the value of register after three clock pulses?
• Match List I with List II and select the correct answer form the codes given below the list List I A. A shift register can be B. A multiplexer C. A decoder can List II 1.for parallel to serial conversion 2.to generate memory can be used chip select 3.for parallel to serial conversion CODES: A B C
• A J-K lip-lop has its J-input connected to logic level 1 and its input to the Q output pulse is fed to its clock input the flip-flop will now