The output of this circuit is always .

Related MCQs

• 1. Open collector output 2. Totem-Pole Output 3. Tri-state output are the type of
• We have a digital circuit. Different parts of circuit operate at different clock frequencies (4MHZ, 2MHZ and 1MHZ), but we have a single clock source having a fix clock frequency (4MHZ), we can get help by
• A logic circuit with an output X = A(Bar)BC+AB(Bar) consists of .
• A standard TTL circuit with a totem-pole output can sink, in the LOW state (IOL(max)),
• A TTL totem-pole circuit is designed so that the output transistors:
• Which table shows the logical state of a digital circuit output for every possible combination of logical states in the inputs ?
• Which table shows the logical state of a digital circuit output for every possible combination of logical states in the inputs ?
• Which table shows the electrical state of a digital circuit's output for every possible combination of electrical states in the inputs ?
• A combinational circuit is one in which the output depends on the
• An output gate is connected to four input gates; the circuit does not function. Preliminary tests with the DMM indicate that the power is applied; scope tests show that the primary input gate has a pulsing signal, while the interconnecting node has no signal. The four load gates are all on different ICs. Which instrument will best help isolate the problem?