We have a digital circuit. Different parts of circuit operate at different clock frequencies (4MHZ, 2MHZ and 1MHZ), but we have a single clock source having a fix clock frequency (4MHZ), we can get help by

Related MCQs

•                  occurs when the same clock signal arrives at different times at different clock inputs due to propagation delay
•                  occurs when the same clock signal arrives at different times at different clock inputs due to propagation delay.
• The flip-flops which operate in synchronism with external clock pulses are known as
• 8: A JK flip-lop has its J input connected to logic level 1 and its input to the Q output. A clock pulse is fed to its clock input. The flip-lop will now
• A combinational logic circuit which sends data coming from a single source to two or more separate destinations is
• The maximum frequency at which digital data can be applied to gate is called
• An output gate is connected to four input gates; the circuit does not function. Preliminary tests with the DMM indicate that the power is applied; scope tests show that the primary input gate has a pulsing signal, while the interconnecting node has no signal. The four load gates are all on different ICs. Which instrument will best help isolate the problem?
• The divide-by-60 counter in digital clock is implemented by using two cascading counters:
• In asynchronous digital systems all the circuits change their state with respect to a common clock
• Which of the following logic families has the highest maximum clock frequency?