The power output of a 10 : 1 scale model of a hydro turbine is measured to be 20 W. The power output in kW expected from the prototype is

Related MCQs

• In order that results obtained in model studies correctly represent the behaviour of the prototype, which of the following similarities must be ensured between the model and the prototype?
• The drag force on a 40 : 1 scale model of a ship is measured to be 10 N. What force, in kN, is expected on the ship?
• It is proposed to model a submarine moving at 10 m/s by taking a 10 : 1 scale model. What velocity, in m/s, would be needed in the model study?
• A hydro-electric site has a head of 100 m and an average discharge of 10m3/s. Assume 92% efficiency, for a greater speed of 6000 rpm, the specific speed of turbine would be
• The difference between the power obtained from the turbine shaft and power supplied by water at its entry to the turbine is equal to
• ......of a turbine is defined as the ratio of power available at the turbine shaft to the power supplied by the water jet.
• A turbine model test with 260 mm diameter showed an efficiency of 90 percent. The efficiency that can be expected from a 1.2 m diameter impeller is
• The maximum continuous power available from a hydro-electric plant under the most adverse hydraulic conditions is known as
• The most popular generation voltage in hydro-electric power stations in India is
• It is desired to predict the performance of a large centrifugal pump from that of a scale model one fourth the diameter. The model absorbs 20 HP when pumping under test head of 20 m at its best speed of 400 r.p.m. The large pump is required to pump against 60 m head. The following will be the speed of the pump