The difference between the power obtained from the turbine shaft and power supplied by water at its entry to the turbine is equal to

Related MCQs

• ......of a turbine is defined as the ratio of power available at the turbine shaft to the power supplied by the water jet.
• The ratio of power developed by the runner to the power supplied by the jet at entrance to the turbine is known as
• A mercury water manometer indicates a gauge difference of 400 mm. The difference in pressure, measured in metres of water, is
• Water enters a turbine at 900 kPa with negligible velocity. What maximum speed, in m/s, can it reach before it enters the turbine rotor?
• Water enters a turbine at 900 kPa with negligible velocity. What maximum speed, in m/s, can it reach before it enters the turbine rotor?
• A closed cubical box 0.8 m on each side is half filled with water and the other half being filled with oil of specific gravity 0.75. Now if the box is accelerated upwards at the rate of 4.905 m/sec2 the pressure difference in kg/m2 between the top and bottom layers would be
• The angle of contact (0) between water and glass tube in case of capillary rise is equal to
• A small-size nozzle is built into a Pelton turbine for directing its water jet towards the back of the bucket, so that machine can be stopped quickly, is known as
• .... is a device which is employed for transmission of power from one shaft to another through a liquid medium.
• The power output of a 10 : 1 scale model of a hydro turbine is measured to be 20 W. The power output in kW expected from the prototype is