A Rankine body can be developed when a source of constant discharge is placed at the origin and in a

Related MCQs

• The head over a 90? V-notch weir increases from 0.15 m to 0.3 m. The ratio of the new discharge to the original discharge is
• “When a body is immersed in a fluid either wholly or partially, it is buoyed or lifted up by a force which is equal to the weight of fluid displaced by the body”. This principle was enunciated by
• The resultant upward pressure of a fluid on a floating body is equal to the wirght of the fluid displaced by the body. This is known as
• When the rheogram for a fluid at any temperature and pressure is a straight line passing through origin, the fluid is said to be
• For a given bed, roughness and discharge when the wetted perimeter is minimum, the which of the following is also minimum?
• A structure in a channel having narrow throat and a raised floor in the bottom which is used to measure the discharge is known as
• A hydro-electric site has a head of 100 m and an average discharge of 10m3/s. Assume 92% efficiency, for a greater speed of 6000 rpm, the specific speed of turbine would be
• When the rheogram is linear but does not pass through origin, fluid is said to be
• The co-efficient of discharge of an orificemeter is ......that of a venturimeter.
• The co-efficient of discharge (Cd) of venturimeter lies within the limits: