The head over a 90? V-notch weir increases from 0.15 m to 0.3 m. The ratio of the new discharge to the original discharge is

Related MCQs

• If 1% error is encountered in the measurement of head over crest of a rectangular weir, the error in discharge will be nearly
• In order that the water shall never rise more than 100 cm above the crest for a discharge of 5 cube metres per second, the length of weir will be
• The total-energy-line in pipe flow is a graphical representation of the Bernoulli’s equation and represents the sum of velocity head, pressure head and the elevation head above:
• When the water flows over a rectangular suppressed weir the pressure beneath the nappe is
• The upper surface of the weir over which water flows is known as
• The effect of negative pressure beneath the nappe in case of flow of water over a rectangular suppressed weir is to
• As the pump speed increases, its NPSH (net positive section head) requirement
• A hydro-electric site has a head of 100 m and an average discharge of 10m3/s. Assume 92% efficiency, for a greater speed of 6000 rpm, the specific speed of turbine would be
• The horizontal to vertical side slope in case of Cpppoletti weir is
• A trapezoidal weir of horizontal crest with side slopes of one horizontal to four vertical is called