In a jet propulsion unit the products of combustion after passing through the gas turbine are discharged into

Related MCQs

• A gas turbine cycle operates through pressures ratio of 5. Air enters the compressor at atmospheric pressure and 25?C and entry to the turbine is at 800?C. The thermal efficiency of the plant has been found to be 37%. Now, if compressor and turbine efficiencies of 80% are taken into account, the value, of thermal efficiency will be
• The efficiency of a jet propulsion unit is generally high at altitudes of
• To augment the thrust of jet propulsion units part of the fuel is burned in the exhaust. How does this fuel burn
• A gas used in gas engine trial was tested in a Boys Calorimeter. The pressure of gas supply was 7 cm of water column. If the barometric pressure is 760 mm of mercury, the absolute pressure of the gas would be
• A steam turbine in which a part of the steam turbine after partial expansion is used for process heating and the remaining steam is further expanded for power generation, is known as
• The power for the propulsion of ship is provided by
• In case of a condensing turbine the pressure in the last stage of the turbine is
• In aircraft using gas turbine the cycle used is
• A gas turbine plant operates between 1 ata and 9 ata with minimum and maximum cycle temperature of 25?C and 1000?C. A two stage compressor is provided with perfect intercooling and work is equally divided between the two stages. The intermediate pressure will be
• A gas turbine works on