When properly made, a butt weld has the strength equal to

Related MCQs

• In a butt welded joint, the size of weld is
• Two plates are joined by a parallel fillet welds. The plates are subjected to a tensile load of 35000 kg. If the allowable shear stress for the weld material be 800 kg the minimum length of 15 mm weld required to resist this load would be
• The ratio of the strength of the weld mterial to that of the parent body is
• In case of quadruple riveted butt joints the joint efficiency is usually assumed in the range
• For butt welding of two plates each of which is 25 mm thick, the best process would be
• For butt welding of two plates, each of which is 300 cm thick, the best process would be
• Neglecting bending, for a parallel load on a fillet weld of equal legs the plane of maximum shear occurs at
• For a parallel load on a fillet weld of equal leg the plane of maximum shear occurs
• For a transverse load on a fillet weld of equal legs, the plane of maximum shear force occurs at
• A solid shaft and a hollow shaft are to be of equal strength in torsion. The hollow shaft is to be 10% larger in diameter than the solid shaft. The ratio of the weight of the hollow shaft will be (both shafts being made of same material)