In order to avoid interference for 20 pressure and teeth, minimum number of teeth should be

Related MCQs

• Which of the following types of gears are free from interference?
• A thin cylinder contains fluid at a pressure of 30 kg kg/cm2, the internal diameter of the shell is 60 cm and the tensile stress in the material is to be limited to 900 kg/cm2. The shell must have a minimum wall thickness of
• If two gears having 24 and 96 teeth mesh each other, they must have been cut
• In case of pressure vessels having open ends the fluid pressure induces
• Stub teeth are provided on gears
• In an inverted tooth chain the included angle between the outer faces of the teeth?
• The angle through which a gear turns from the beginning of contact of a pair of teeth until the contact reaches the pitch point, is known as
• A compressed air cylinder carries approximately 70 kg/cm2 pressure at the time of delivery. The inside diameter is 25 cm. If the steel has a yield point of 2300 kg/sq cm and a safety factor of 2.5 the wall thickness should be
• An involute gear should have minimum of
• What should be the thickness of a cast iron pipe 45 cm diameter if it is required to sustain 6 kg/sq cm inside pressure ? The maximum stress in the pipe material being limited to 140 kg/cm2