In case of pressure vessels having open ends the fluid pressure induces

Related MCQs

• A thin cylinder contains fluid at a pressure of 30 kg kg/cm2, the internal diameter of the shell is 60 cm and the tensile stress in the material is to be limited to 900 kg/cm2. The shell must have a minimum wall thickness of
• The bursting pressure of 12 mm ID, 14 mm OD seamless cartridge brass tubing having ultimate whear stress of 225 Mpa, will be nearly
• The ends of the coil of compression spring which are in contact with the seat are
• In case of biaxial stress system when a member is subjected to tensile stresses in two perpendicular directions the maximum shear stress in case of mild steel occurs on a plane inclined at
• In case of spur gears the higher pressure angle results in
• In an open belt-pulley drive the bodily slip occurs
• If two gears having 24 and 96 teeth mesh each other, they must have been cut
• A V-belt having B section is generally used when the power to be transmitted is in the range
• Rinkine-Gordon formula for buckling load is adopted for columns having slenderness ratio between
• An induction motor meant for operation on 60 cycles per second is connected to a supply having 50 cycles per second. What will happen