Lubricant is not required in

Related MCQs

• In rolling bearings lubricant viscosity
• The uniform rate of descent is maintained by a brake on the drum which applies the necessary torque of 300 kg-m what additional brake torque is required to bring the system to rest in 0.50 second?
• What should be the thickness of a cast iron pipe 45 cm diameter if it is required to sustain 6 kg/sq cm inside pressure ? The maximum stress in the pipe material being limited to 140 kg/cm2
• The amount of energy required upto fracture is known as
• Two plates are joined by a parallel fillet welds. The plates are subjected to a tensile load of 35000 kg. If the allowable shear stress for the weld material be 800 kg the minimum length of 15 mm weld required to resist this load would be
• A spherical metal vessel 120 cm diameter is subjected to an internal pressure of 15 kg/sq cm. If the permissible stress is 625 kg/sq cm and the efficiency of the riveted joints is 75%, the required thickness of the plate would be
• A circulating water pump of a condenser is of the centrifugal type and directly connected to a three phase induction motor running at 900 rpm. The pump delivers 30,000 litres per minute against the dynamic head of 10 m. The horse power of the motor required to drive the pump would be
• Which of the following is not the result of cold work?
• The following type of mechanism is not possible in any framed structure as an independent mechanism
• Helical springs are not subjected to