Which of the following drive cannot be used for driving cam shaft of a four stroke intemal cambustion engine?

Related MCQs

• A solid shaft and a hollow shaft are to be of equal strength in torsion. The hollow shaft is to be 10% larger in diameter than the solid shaft. The ratio of the weight of the hollow shaft will be (both shafts being made of same material)
• A key and a shaft are made from the same material. The key is rectangular with a width of D/4 and a height of 3D/16. The shaft is under torsion only. The necessary length of the key for equal strength of the shaft and key will be
• A solid shaft of 100 mm diameter transmits 100 HP at (450/?) r.p.m. The torque in kg-m on the shaft would be
• If a square key and the shaft are to be of the same material and of equal strength, the length of key would be (d = dia. Of shaft)
• The type of cam used for low and moderate speed engines is generally
• The cam used for high speed engines is
• In order to minimise jerks, the type of cam used is
• The cam follower generally used in automobiles is
• The period during which a cam follower does not move is known as
• Which cam profile is preferred for minimum jerks?