The percentage reduction of area during tensile test on a cast iron specimen may be

Related MCQs

• If percentage reduction in area of a certain specimen made of material 'A' under tensile test is 60% and the percentage reduction in area of a specimen with same dimensions made of material 'B' is 40%, then
• If percentage elongation of a certain specimen made of a material 'A' under tensile test is 30% and the percentage elongation of a specimen with same dimensions made of another material 'B' is 40%, then material 'B' is more ductile than material 'A'.
• In a universal testing machine during the testing of a specimen of original cross-sectional area 1 cm2 the maximum load appliied was 7.5 tonnes and neck area 0.6 sq. cm. The ultimate tensile strength of the specimen is
• In a tensile test of specimen,the ratio of maximum load to the original cross sectional area of test piece is called
• In compression test, the fracture in cast iron specimen would occur along
• In a compression test the fracture in cast iron specimen would occur along
• In a tensile test, when the material is stressed beyond elastic limit, the tensile strain
• The longitudinal strain for a specimen is 0.01 and it is found to undergo 1 mm change in its thickness. The thickness of the specimen will be
• A tensile test is performed on a round bar. After fracture it has been found that the diameter remains approximately same at fracture. The material under test was
• A stepped bar of steel consists of a pmormtion with cross section area 500 mm2 connected to a portion with cross section area 1000 2. Each portion has a length of 1 m. The modulus of elasticity of steel is 200 GPa. The maximum elongation of the bar by applying an axial tensile force at the ends without exceeding a stress of 100 MPa is    mm.