In compression test, the fracture in cast iron specimen would occur along

Related MCQs

• In a compression test the fracture in cast iron specimen would occur along
• A tensile test is performed on a round bar. After fracture it has been found that the diameter remains approximately same at fracture. The material under test was
• The percentage reduction of area during tensile test on a cast iron specimen may be
• If percentage reduction in area of a certain specimen made of material 'A' under tensile test is 60% and the percentage reduction in area of a specimen with same dimensions made of material 'B' is 40%, then
• If percentage elongation of a certain specimen made of a material 'A' under tensile test is 30% and the percentage elongation of a specimen with same dimensions made of another material 'B' is 40%, then material 'B' is more ductile than material 'A'.
• A short, hollow cast iron cylinder with a wall thickness of 1 cm is to carry a compressive load of 10 tonnes. If the working stress in compression is 800 kg/cm2, the outside diameter of the cylinder should not be less than
• The longitudinal strain for a specimen is 0.01 and it is found to undergo 1 mm change in its thickness. The thickness of the specimen will be
• In a universal testing machine during the testing of a specimen of original cross-sectional area 1 cm2 the maximum load appliied was 7.5 tonnes and neck area 0.6 sq. cm. The ultimate tensile strength of the specimen is
• In a tensile test of specimen,the ratio of maximum load to the original cross sectional area of test piece is called
• A tensile test is performed on a mild steel round bar. Its diameter after fracture will