The longitudinal strain for a specimen is 0.01 and it is found to undergo 1 mm change in its thickness. The thickness of the specimen will be

Related MCQs

• A prismatic bar of volume V is subjected to a tensile force in longitudinal direction. If Poisson's ratio of the material is u and longitudinal strain is e, then the final volume of the bar becomes
• Every direct stress is always accompanied by a strain in its own direction and an opposite kind of strain in every direction, at right angles to it. Such a strain is known as
• Under uniaxial strain, the ratio of maximum shearing strain to uniaxial strain is
• For a thin longitudinal cylinder the ratio hoop stress/longitudinal stress is
• A solid cube is subjected to equal normal forces of the same type on all its faces. The ratio volumetric strain/liner strain in any of the three xes will be
• If percentage reduction in area of a certain specimen made of material 'A' under tensile test is 60% and the percentage reduction in area of a specimen with same dimensions made of material 'B' is 40%, then
• If percentage elongation of a certain specimen made of a material 'A' under tensile test is 30% and the percentage elongation of a specimen with same dimensions made of another material 'B' is 40%, then material 'B' is more ductile than material 'A'.
• In a universal testing machine during the testing of a specimen of original cross-sectional area 1 cm2 the maximum load appliied was 7.5 tonnes and neck area 0.6 sq. cm. The ultimate tensile strength of the specimen is
• Engineering stress strain curve and true stress strain curve are equal up to
• The strain energy stored in a specimen when strained within elastic limit is known as