The coefficient of linear expansion of a solid is L. The volume V of a cube of this solid on being heated by 1?C will change by

Related MCQs

• Three solid objects of the same material and of equal mass-a sphere, a cylinder (length = diameter) and a cube are at 500°C initially. These are dropped in a quenching bath containing a large volume of cooling oil each attaining the bath temperature eventually. The time required for 90% change in temperature is the smallest for
• A shpere, a cube and a disc all of the same material, quality and volume are heated to 900K and left in air. Which of these will have the lowest rate of cooling
• 200 kg of solids (on dry basis) is subjected to a drying process for a period of 5000 seconds. The drying occurs in the constant rate period with the drying rate as, Nc = 0.5 × 10-3 kg/m2 .s. The initial moisture content of the solid is 0.2 kg moisture/kg dry solid. The interfacial area available for drying is 4 m2 /1000 kg of dry solid. The moisture content at the end of the drying period is (in kg moisture/kg dry solid).
• A cube, sphere & a thin circular plate (all having same mass and made of same material) are all heated to 300°C and allowed to cool in natural air. Which one will cool the slowest?
• Four identical copper cubes are painted with different paints. Now if all the cubes are heated to the same temperature and are left in vacuum, which cube will lose heat more rapidly? The colours of the cubes are
• A hollow sphere and a solid sphere of the same material and equal radii are heated to the same temperature. In this case,
• If average heat transfer co-efficient is ha and the local coefficient at the end of the plate is hl then in case of heat transfer to a fluid flowing over a flat plate, heated over its entire length
• The rate of heat flow between a solid wall and a fluid (in contact with a solid wall) is given by
• If two systems are being compared on the basis of temperature and heat flux, the similarity being considered is
• When heat is transferred from one particle of hot body to another by actual motion of the heated particles, it is referred to as heat transfer by