The precast prestressed hollow core slabs, with or without topping is an important structural element in                      

Related MCQs

• If the compression zone contains part of precast element, the computation is done by considering?
• If the surface is rough tamped and without links to withstand a horizontal shear stress of 0.6n/mm2 and assuming the moduli of elasticity of precast and insitu cast concrete to be equal the centroid of the composite section is located 110mm from the top of the slab, second moment area of composite section is 2487×105mm4, calculate ultimate shearing resistance?
• One way slabs may be supported across the entire width of the slab by means of
• The simple or continuous slabs are analyzed for                      
• The minimum cube strength of concrete used for a prestressed member, is                  
• The end block of a prestressed concrete beam has a rectangular section; a cable carrying a force of 200kn is to be anchored against the end block at the centre if the cube strength of concrete at transfer is 30n/mm2. Design the maximum permissible bearing pressure?(Abr = 10000mm2)
• The prestressed concrete slab systems are ideally suited for                      
• A simple prestressed flat slab is generally supported by a network of                      
• The proportioning of tendons in design of prestressed concrete simple flat slab between the column and middle strips may be based on                      
• Structural Steel normally has carbon content less than