Which pin is a programmable peripheral interface?

Related MCQs

• 8086 microprocessor is interfaced to 8253 a programmable interval timer. The maximum number by which the clock frequency on one of the timers is divided by ________________.
• I/o ports of programmable devices are limited in current capacity, therefore, additional transistors or ICs called ________
• Smarts cards may have up to ______ kilobytes of RAM, ___ kilobytes of ROM, ___ kilobytes of programmable ROM, and a 16-bit microprocessor
• 8086 is interfaced to two 8259s (Programmable interrupt controllers). If 8259s are in master slave configuration the number of interrupts available to the 8086 microprocessor is _____________.
• Designing logic circuits and writing instructions to enable the microprocessor to communicate with peripheral is called _________
• Data transfer between the microprocessor for peripheral takes place through __________
• The pin of minimum mode AD0-AD15 has ____________ address
• The pin of minimum mode AD0- AD15 has _________ data bus
• The _______ pin is used to select direct command word
• In ADC 0808 if _______ pin high enables output