register is used for the purpose of controlling the status of each interrupt request in parallel priority interrupt.

Related MCQs

•               interrupt method uses register whose bits are set separately by interrupt signal for each device.
•                     method is used to establish priority by serially connecting all devices that request an interrupt.
• _________ method is used to establish priority by serially connecting all devices that request an interrupt.
• The added output of the bits of the interrupt register and the mask register is set as an input of                               
• The interrupt-request line is a part of the                         
• The PCI BUS has            interrupt request lines.
• When the R/W bit of the status register of the DMA controller is set to 1.
• The step where in the results stored in the temporary register is transferred into the permanent register is called as
• The addressing mode/s, which uses the PC instead of a general purpose register is               
• The floating point numbers are stored in general purpose register in IA-32.