29 input circuit will have total of

Related MCQs

• A logic circuit that provides a HIGH output if one input or the other input, but not both, is HIGH, is a(n):
• Refer to the given figures (a) and (b). A logic analyzer is used to check the circuit in figure (a) and displays the waveforms shown in figure (b). The actual analyzer display shows all four data outputs, Q0-Q3. The analyzer's cursor is placed at position X and all four of the data output lines show a LOW level output. What is wrong, if anything, with the circuit?
• A binary-weighted-input digital-to-analog converter has a feedback resistor, Rf, of 12 k. If 50 A of current is through the resistor, voltage out of the circuit is ________.
• Determine the output frequency for a frequency division circuit that contains 12 flip-flops with an input clock frequency of 20.48 MHz.
• Which combinational circuit is renowned for selecting a single input from multiple inputs & directing the binary information to output line?
• Show from the truth table how an exclusive-OR gate can be used to invert the data on one input if the other input is a special control function.
• A bidirectional 4-bit shift register is storing the nibble 1101. Its input is HIGH. The nibble 1011 is waiting to be entered on the serial data-input line. After three clock pulses, the shift register is storing                  
• To read from the memory, the select input and the power down/program input must be
• A                          is a circuit with only one output but can have multiple inputs.
• A full subtracter circuit requires ________.