Refer to the given figures (a) and (b). A logic analyzer is used to check the circuit in figure (a) and displays the waveforms shown in figure (b). The actual analyzer display shows all four data outputs, Q0-Q3. The analyzer's cursor is placed at position X and all four of the data output lines show a LOW level output. What is wrong, if anything, with the circuit?

Related MCQs

• The logic circuits whose outputs at any instant of time depends only on the present input but also on the past outputs are called
•                            expressions can be implemented using either (1) 2-level AND- OR logic circuits or (2) 2-level NAND logic circuits.
• A logic circuit that provides a HIGH output for both inputs HIGH or both inputs LOW is a(n):
• A logic circuit that provides a HIGH output for both inputs HIGH or both inputs LOW is
• Which logic is the fastest of all the logic families?
• The parallel outputs of a counter circuit represent the                            
• A logic circuit that provides a HIGH output if one input or the other input, but not both, is HIGH, is a(n):
• Low-voltage positive emitter-coupled logic (LVPECL) is a power optimized version of                      
• If the number of n selected input lines is equal to 2^m then it requires            select lines.
• Show from the truth table how an exclusive-OR gate can be used to invert the data on one input if the other input is a special control function.