In ROM, each bit combination that comes out of the output lines is called                        

Related MCQs

• In ROM, each bit is a combination of the address variables is called                        
• Assume that a 4-bit serial in/serial out shift register is initially clear. We wish to store the nibble 1100. What will be the 4-bit pattern after the second clock pulse? (Right-most bit first)
• The group of bits 11001 is serially shifted (right-most bit first) into a 5-bit parallel output shift register with an initial state 01110. After three clock pulses, the register contains                  
• Which of the following describes the action of storing a bit of data in a mask ROM?
• An 8-bit serial in/serial out shift register is used with a clock frequency of 150 kHz. What is the time delay between the serial input and the Q3 output?
• Refer to the given figures (a) and (b). A logic analyzer is used to check the circuit in figure (a) and displays the waveforms shown in figure (b). The actual analyzer display shows all four data outputs, Q0-Q3. The analyzer's cursor is placed at position X and all four of the data output lines show a LOW level output. What is wrong, if anything, with the circuit?
• What is the maximum possible range of bit-count specifically in n-bit binary counter consisting of ‘n’ number of flip-flops?
• If the number of n selected input lines is equal to 2^m then it requires            select lines.
• In four bit dynamic shift register output is obtained
• The check sum method of testing a ROM: