In FPGA, vertical and horizontal directions are separated by                          

Related MCQs

• Which type of device FPGA are?
• The FPGA refers to                          
• Refer to the given figures (a) and (b). A logic analyzer is used to check the circuit in figure (a) and displays the waveforms shown in figure (b). The actual analyzer display shows all four data outputs, Q0-Q3. The analyzer's cursor is placed at position X and all four of the data output lines show a LOW level output. What is wrong, if anything, with the circuit?
• How many AND, OR and EXOR gates are required for the configuration of full
• The range of voltages between VL(max) and VH(min) are ________.
• The output of an AND gate is LOW ________.
• Digital signals transmitted on a single conductor (and a ground) must be transmitted in:
• Parity systems are defined as either________ or ________ and will add an extra ________ tothe digital information being transmitted.
• A Schmitt trigger has VT+ = 2.0 V and VT– = 1.2 V. What is the hysteresis voltage of the Schmitt trigger?
• If a DAC has a full-scale, or maximum, output of 12 V and accuracy of 0.1%, then the maximum error for any output voltage is ________.