In which of the following gas welding process a non-consumable electrode is used?

Related MCQs

• Consider a situation in which a welding operation is being performed with V = 20 volts, I = 200 A, and the cross-sectional area of the weld bead is 30 mm2. Estimate the welding speed if the workpiece and electrode are made of (a) aluminum, (b) carbon steel, and (c) titanium. Use an efficiency of 75%.
• If the total efficiency is 0.35 in arc welding. Then what is the welding speed in mm/sec if the cross-sectional area is 5mm2, welding power is 2 kW and the heat required in melting the metal is 100 J/mm3.
• What is the differentiating factor between flux core arc welding and gas-shielded metal arc welding processes?
• Which of the following welding process in which heat is produced for welding by a chemical reaction?
• volts, I = 200 A, and the cross-sectional area of the weld bead is 30 mm2. Estimate the welding speed if the workpiece and electrode are made of (a) aluminum, (b) carbon steel, and (c) titanium. Use an efficiency of 75%.
• In arc welding, arc is created between the electrode and work by?
• In inertia friction welding energy of welding machine is used.
• In inertia friction welding              energy of welding machine is used.
• Which of the following gas welding process uses constant voltage?
• Weld strength in inertia friction welding is more than direct drive friction welding.