Which of the following is the most widely used alphanumeric code for computer input and output?

Related MCQs

• A logic circuit that provides a HIGH output if one input or the other input, but not both, is HIGH, is a(n):
• Refer to the given figures (a) and (b). A logic analyzer is used to check the circuit in figure (a) and displays the waveforms shown in figure (b). The actual analyzer display shows all four data outputs, Q0-Q3. The analyzer's cursor is placed at position X and all four of the data output lines show a LOW level output. What is wrong, if anything, with the circuit?
• Show from the truth table how an exclusive-OR gate can be used to invert the data on one input if the other input is a special control function.
• An 8-bit serial in/serial out shift register is used with a clock frequency of 150 kHz. What is the time delay between the serial input and the Q3 output?
• In which of the following gates the output is 1 if and only if at least one input is 1?
• To read from the memory, the select input and the power down/program input must be
• A bidirectional 4-bit shift register is storing the nibble 1101. Its input is HIGH. The nibble 1011 is waiting to be entered on the serial data-input line. After three clock pulses, the shift register is storing                  
• Let the input of a subtractor is A and B then what the output will be if A = B?
• Let A and B is the input of a subtractor then the output will be                        
• If minuend = 0, subtrahend = 1 and borrow input = 1 in a full subtractor then the borrow output will be