For earthquake resistant masonry buildings, the vertical distance between openings one above the other in a load bearing wall shall not be less than

Related MCQs

• If is the height of wall between centers of supports, then the effective height of wall where concrete floors have a bearing on wall irrespective of the direction of span will be
• The timber floor not spanning on the masonry wall but properly anchored to the wall gives
• Direct load carrying capacity of a brick masonry wall standing freely as against when it supports RC slab will be
• For designing masonry components of a structure, seismic forces provision in the design calculation is not necessary for buildings constructed in
• The thickness of each leaf of a cavity wall shall not be less than
• Minimum thickness of stiffening wall for 1 to 3 storeys shall not be less than
• Water retentivity for brick masonry should not be less than
• The bending stress in a wall or column subjected to effective vertical load need not be considered, if the eccentricity ratio is
• In a cavity wall, both leaves of which are load bearing, the effective thickness is taken as
• A 200 mm thick wall made of modular bricks is 5 m long between cross walls and 3.8 m clear height between RCC slabs at top and bottom. The slenderness ratio of the wall is