McqMate

Q. |
## In a built up section carrying a tensile force, the flanges of two channels are turned outward |

A. | to simplify the transverse connections |

B. | to minimise lacing |

C. | to have greater lateral rigidity |

D. | all the above |

Answer» C. to have greater lateral rigidity |

1.5k

0

Do you find this helpful?

8

View all MCQs in

Design of Steel StructuresNo comments yet

- In a built up section carrying a tensile force, the flanges of two channels are turned outward
- The equivalent axial tensile load Pe, which produces an average axial tensile stress in the section equivalent to the combined stress due to axial tension P and bending M, at the extreme fibre of the section, is given by (where Z is the section modulus of the section).
- The maximum tensile and compressive bending stress in extreme fibres of rolled I-sections and channels on the effective section, is
- The maximum tensile and compressive bending stress in extreme fibres of rolled I-sections and channels on the effective section, is
- The moment of the couple set up in a section of a beam by the longitudinal compressive and tensile force, is known as
- The moment of the couple set up in a section of a beam by the longitudinal compressive and tensile force, is known as
- The distance between e.g. of compression and e.g. of tension flanges of a plate girder, is known as
- The distance between the outer faces of flanges of a plate girder, is known as
- A structural member subjected to tensile force in a direction parallel to its longitudinal axis, is generally known as
- A structural member subjected to tensile force in a direction parallel to its longitudinal axis, is generally known as