In a tension member if one or more than one rivet holes are off the line, the failure of the member depends upon:

Related MCQs

• In a tension member if one or more than one rivet holes are off the line, the failure of the member depends upon:
• The distance measured along one rivet line from the centre of a rivet to the centre of adjoining rivet on an adjacent parallel rivet line, is called
• The distance measured along one rivet line from the centre of a rivet to the centre of adjoining rivet on an adjacent parallel rivet line, is called
• When the axis of load lies in the plane of rivet group, then the most heavily loaded rivet will be the one which moment in any rivet.)
• When a tension member consists of two channel sections, the allowance for rivet hole is made for two holes from
• When a tension member consists of two channel sections, the allowance for rivet hole is made for two holes from
• Diameter of a rivet hole is made larger than the diameter of the rivet by
• The minimum pitch of rivet holes of diameter d should not be less than
• If the thickness of plate to be connected by a rivet is 16 mm, then suitable size of rivet as per Unwin's formula will be
• If the thickness of plate to be connected by a rivet is 16 mm, then suitable size of rivet as per Unwin's formula will be