The spread between the point and splice rails at a distance of 4.25 m is 50 cm. The size of the crossing is

Related MCQs

• If G is gauge distance and a is crossing, the distance between the nose of acute crossing and nose of obtuse crossing of a rail diamond, measured along the rail not forming the diamond, is
• To avoid the damage of nose of crossing, the wing rails are ramped so that nose of crossing remains at a lower level by
• The distance between theoretical nose of crossing and actual nose of crossing for practical purposes, is
• Due to battering action of wheels over the end of the rails, the rails get bent down and are deflected at ends. These rails are called
• If the standard length of a B.G. crossing is 597 cm, the number of crossing, is
• If the standard length of a crossing is 480 cm, the number of crossing is
• The number of a crossing is defined as the cotangent of the crossing angle.
• If absolute levels of rails at the consecutive axles A, B, and C separated by 1.8 metres are 100.505 m, 100.530 m, and 100.525 m respectively, the unevenness of rails, is
• The check rails are placed opposite the crossing so that
• To prevent creep in rails, the steel sleepers are fixed with rails by clips, bolts and