The type of bearing plate used in all joints and on curves to give better bearing area to the rails is

Related MCQs

• Due to battering action of wheels over the end of the rails, the rails get bent down and are deflected at ends. These rails are called
• If the stock rails are B.H. rails, the type of switch generally provided, is
• If absolute levels of rails at the consecutive axles A, B, and C separated by 1.8 metres are 100.505 m, 100.530 m, and 100.525 m respectively, the unevenness of rails, is
• In order to counteract the increased lateral thrust on curves, an extra shoulder provided on the outside of curves is
• Staggered rail joints are generally provided on curves.
• To prevent creep in rails, the steel sleepers are fixed with rails by clips, bolts and
• The rails are laid without bending, at flat curves, where the degree of curve is
• Check rails are provided on inner side of inner rails if sharpness of a B.G. curve, is more than
• To reduce the wearing of rails, the rails are placed at an
• The bull - headed and double headed rails do not require bearing plates for flixing.