When considering source-to-fiber coupling efficiencies, the ________ is an important parameter than total output power.

Related MCQs

• A planar LED is fabricated from GaAs is having a optical power emitted is 0.018% of optical power generated internally which is 0.018% of optical power generated internally which is 0.6 P. Determine external power efficiency.
• When optical fibers are to be installed in a working environment, the most important parameter to be considered is
• If the input power 100μW is launched into 6 km of fiber, the mean optical power at the fiber output is 2μW. What is the overall signal attenuation through the fiber assuming there are no connectors or splices?
• A four-port multimode fiber FBT coupler has 50 μWoptical power launched into port 1. The measured output power at ports 2,3 and 4 are 0.003, 23.0 and 24.5 μW respectively. Determine the excess loss.
• The overall power conversion efficiency of electrical lens coupled LED is 0.8% and power applied 0.0375 V. Determine optical power launched into fiber
• The fiber should be________________ to avoid deterioration of the optical transmission characteristics resulting from mode-coupling-induced micro-bending.
• Two joined step index fibers are perfectly aligned. What is the coupling loss of numerical aperture are NAR= 0.26 for emitting fiber?
• Two joined graded index fibers that are perfectly aligned have refractive indices αR=1.93for receiving fiber αE= 2.15 for emitting fiber. Calculate the coupling loss
• A step index fiber has a coupling efficiency of 0.906 with uniform illumination of all propagation modes. Find the insertion loss due to lateral misalignment?
• Determine coupling efficiency if the misalignment loss in a graded index fiber is 0.102