The overall power conversion efficiency of electrical lens coupled LED is 0.8% and power applied 0.0375 V. Determine optical power launched into fiber

Related MCQs

• Determine the overall power conversion efficiency of lens coupled SLED having forward current of 20 mA and forward voltage of 2 V with 170 μWof optical power launched into multimode step index fiber.
• In a GaAs LED, compute the loss relative to internally generated optical power in the fiber when there is small air gap between LED and fiber core. (Fiber coupled = 5.5 * 10-4Pint)
• If the input power 100μW is launched into 6 km of fiber, the mean optical power at the fiber output is 2μW. What is the overall signal attenuation through the fiber assuming there are no connectors or splices?
• A planar LED is fabricated from GaAs is having a optical power emitted is 0.018% of optical power generated internally which is 0.018% of optical power generated internally which is 0.6 P. Determine external power efficiency.
• Estimate optical power coupled into fiber of DH SLED having emission area of 1.96*10-5, radiance of 40 W/rcm2, numerical aperture of 0.2 and Fresnel reflection coefficient of 0.03 at index matched fiber surface.
• If a particular optical power is coupled from an incoherent LED into a low-NA fiber, the device must exhibit very high radiance . State whether the given statement is true or false.
• The fiber is positioned at the ________ of the lens in order to obtain a collimated beam and to minimize lens-to-lens longitudinal misalignment effects.
• When a constant d.c. drive current is applied to device, the optical o/p power is 320 μm. Determine optical o/p power when device is modulated at frequency 30 MHz with minority carrier recombination lifetime of LED i.e. 5ns.
• A measure of amount of optical fiber emitted from source that can be coupled into a fiber is termed as
• Determine coupling efficiency into the fiber when GaAs LED is in close proximity to fiber core having numerical aperture of 0.3