[Solved] A measure of amount of optical fiber emitted from source that can be coupled into a fiber is termed as

Q.	A measure of amount of optical fiber emitted from source that can be coupled into a fiber is termed as
A.	radiance
B.	angular power distribution
C.	coupling efficiency
D.	power-launching
Answer» C. coupling efficiency

994

Do you find this helpful?

View all MCQs in

Broadband Communication Systems

Discussion

No comments yet

Related MCQs

In a GaAs LED, compute the loss relative to internally generated optical power in the fiber when there is small air gap between LED and fiber core. (Fiber coupled = 5.5 * 10-4Pint)
A planar LED is fabricated from GaAs is having a optical power emitted is 0.018% of optical power generated internally which is 0.018% of optical power generated internally which is 0.6 P. Determine external power efficiency.
Estimate optical power coupled into fiber of DH SLED having emission area of 1.96*10-5, radiance of 40 W/rcm2, numerical aperture of 0.2 and Fresnel reflection coefficient of 0.03 at index matched fiber surface.
A GaAs optical source having a refractive index of 3.2 is coupled to a silica fiber having a refractive index of 1.42. Determine Fresnel reflection at interface in terms of percentage.
If the input power 100μW is launched into 6 km of fiber, the mean optical power at the fiber output is 2μW. What is the overall signal attenuation through the fiber assuming there are no connectors or splices?
If a particular optical power is coupled from an incoherent LED into a low-NA fiber, the device must exhibit very high radiance . State whether the given statement is true or false.
Determine the overall power conversion efficiency of lens coupled SLED having forward current of 20 mA and forward voltage of 2 V with 170 μWof optical power launched into multimode step index fiber.
The overall power conversion efficiency of electrical lens coupled LED is 0.8% and power applied 0.0375 V. Determine optical power launched into fiber
A single-mode optical fiber has an attenuation of 0.3dB/km when operating at wavelength of 1.1μm. The fiber core diameter is 4μmand bandwidth is 500 MHz. Find threshold optical power for stimulated Brillouin scattering.
________ couplers combine the different wavelength optical signal onto the fiber or separate the different wavelength optical signal output from the fiber.