Which of the following turbine is preferred 0 to 25m head of water? P

Related MCQs

• The speed ratio of an impulse turbine operating under a head off 400m is 0.46. The p.c.d of turbine wheel is 22.25m then rotational speed, in rpm is
• In this type of low head turbine, the guide vanes are fixed to the hub of the turbine and are not adjustable. What is this type of turbine called?
• The velocity of the flow through the Kaplan turbine is 25 m/s. The available head of the turbine is 60 m. Find the flow ratio of the turbine (take g = 10 m/s2).
• A Kaplan turbine requires a speed ratio of 2. The available head of the turbine is 5 m. What should be the blade velocity of the turbine such that a speed ratio of 2 is maintained (take g = 10 m/s2)?
• The turbine is preferred for 0 to 25 m head of water?
• The flow ratio of a Kaplan turbine is given as 0.7. The available head is 30 m. The outer diameter of the runner is 3.5 m and the hub diameter is 2 m. Find the volume of water flowing through the turbine per second (m3/s)?
• In a Kaplan Turbine experimental setup, the power output of the shaft is 4.325 MW. The volume flow rate of water in 15 m3/s at an available head of 50 m. Find the overall efficiency of the turbine in % (g = 10 m/s2)?
• In Kaplan turbine apparatus, the volume flow rate of water in 15 m3/s at an available head of 55 m (g = 10 m/s2). Find the shaft power (in MW) if the overall efficiency of the turbine is 95%.
• Which of the following efficiencies for Francis Turbine is described as the ratio between total quantity of water over runner blades to total quantity of water supplied to turbine?
• Which of the following efficiencies for Kaplan Turbine is described as the ratio between total quantity of water over runner blades to total quantity of water supplied to turbine?