Hydraulic radius for wide rectangular channel section is---

Related MCQs

• A hydraulic jump takes place in a horizontal rectangular channel from a depth of 0.20m to 2.40m The discharge in the channel in m3/s per meter width is…
• The hydraulic mean depth or the hydraulic radius is the ratio of
• In a horizontal rectangular channel a hydraulic jump with a sequent depth ratio of 5.0 is formed. This jump can be classified as
• The differential equation of the gradually varied flow can be written by using Manning’s Formula for the case off a wide rectangular channel as (dy/dx) =
• Hydraulic energy is converted into another form of energy by hydraulic machines. What form of energy is that?
• A rectangular block 2 m long, 1 m wide and 1 m deep floats in water, the depth of immersion being 0.5 m. If water weighs 10 kN/m3, then the weight of the block is
• Surge wave in a rectangular channel is an example of i) steady flow ii) unsteady flow iii) uniform flow iv) non-uniform flow The correct answer is
• A hydraulically efficient trapezoidal section has a side slopes of 2 horizontal :1 vertical. The ratio of the bed width to depth B/y in this channel is
• The discharge over a rectangular weir, considering the velocity of approach, is (whereH1 = H + Ha = Total height of water above the weir, H = Height of water over the crest of the weir, and Ha = Height of water due to velocity of approach)
• A vertical rectangular plane surface is submerged in water such that its top and bottom surfaces are 1.5 m and 6.0 m res-pectively below the free surface. The position of center of pressure below the free surface will be at a distance of