calculate the frictional slope of a triangular channel having depth 2.5m and side slope of 1H:2V.
If the rate of change of specific energy is 1.6 x10-5m/s, If V= 1.57 m/s.

Related MCQs

• Calculate the value of rate of change of specific energy for a triangular channel having depth 3.5m and the side slope is 1H:2V. Given: V=2.5m/s, dy/dx= 8.6x10-4
• Calculate the value of Froud’s number if the ratio of rate of change of specific energy and rate of change of depth is 0.9.
• Calculate the value of Sf for trapezoidal channel having depth 2m, width 5m and side slope of 1H:1.5V. Given: dy/dx= 1.18x10-3, S0= 1 in 1000, C= 50.
• Calculate the bed slope of the channel if the slop of the energy line is 0.00024 and the length of backwater curve is 104166.67m. If E1-E2= 3m.
• If the difference between specific energies is 2m, calculate the rate of change of specific energies if the length of backwater curve is 26314 m.
• A hydraulic jump takes place in a horizontal rectangular channel from a depth of 0.20m to 2.40m The discharge in the channel in m3/s per meter width is…
• is ratio of pressure energy change inside runner to total energy change inside runner
• If the depth of water in an open channel is greater than the critical depth, the flow is called
• A hydraulically efficient trapezoidal section has a side slopes of 2 horizontal :1 vertical. The ratio of the bed width to depth B/y in this channel is
• The discharge through a wholly drowned orifice is given by (where H1 = Height of water (on the upstream side) above the top of the orifice, H2 = Height of water (on the downstream side) above the bottom of the orifice, and H = Difference between two water levels on either side of the orifice)