McqMate
These multiple-choice questions (MCQs) are designed to enhance your knowledge and understanding in the following areas: Bachelor of Fashion Technology (BFT) .
| 1. |
___________ is the confirmation of the product to the accepted level of standards set by standardization organization, buyer or the consumer |
| A. | Quality |
| B. | Management |
| C. | Involvement |
| D. | Finishing |
| Answer» A. Quality | |
| 2. |
__________is an example for extrinsic cue of quality |
| A. | Price |
| B. | Garment |
| C. | Assembly |
| D. | Yarn |
| Answer» A. Price | |
| 3. |
__________ is created during product manufacturing, is dependent on styling, fit, materials and assembly methods |
| A. | Intrinsic quality |
| B. | Extrinsic cues |
| C. | Product variation |
| D. | Quality Standards |
| Answer» A. Intrinsic quality | |
| 4. |
Visual merchandising techniques and advertising are common ______________ |
| A. | Intrinsic cue |
| B. | Extrinsic cue |
| C. | Operational process |
| D. | Services |
| Answer» B. Extrinsic cue | |
| 5. |
_______________ has been considered as a combination of various process representing dynamic behavior of an organization |
| A. | TQM |
| B. | TQC |
| C. | TMQ |
| D. | TQS |
| Answer» A. TQM | |
| 6. |
___________ is the model for quality assurance in design and development, production installation and servicing |
| A. | ISO 1400 |
| B. | ISO 9000 |
| C. | ISO9001 |
| D. | ISO 9002 |
| Answer» C. ISO9001 | |
| 7. |
_________ is the model for quality assurance in production installation and servicing |
| A. | ISO 9000 |
| B. | ISO9001 |
| C. | ISO 9002 |
| D. | ISO 9003 |
| Answer» C. ISO 9002 | |
| 8. |
_________ is the model for quality assurance in final inspection and Test |
| A. | ISO 9000 |
| B. | ISO9001 |
| C. | ISO 9003 |
| D. | ISO 9004 |
| Answer» C. ISO 9003 | |
| 9. |
__________ is a guide for application of quality management system |
| A. | ISO 1400 |
| B. | ISO 9000 |
| C. | ISO9003 |
| D. | ISO 9004 |
| Answer» D. ISO 9004 | |
| 10. |
Expand ISO |
| A. | Indian Statistical organization |
| B. | International statistical organization |
| C. | Indian Standard organization |
| D. | International Standard organization |
| Answer» D. International Standard organization | |
| 11. |
__________ can be considered as a high level audit performed at management level and take place at regular interval |
| A. | Quality audit |
| B. | Quality cycle |
| C. | Quality circle |
| D. | Quality monitor |
| Answer» D. Quality monitor | |
| 12. |
__________ is an inbuilt function for majority of clothing industry |
| A. | Quality control |
| B. | Eco labeling |
| C. | Reporting |
| D. | Quality monitoring |
| Answer» A. Quality control | |
| 13. |
_____________ define the quality as the degree to which a set of inherent characteristic fulfills requirements |
| A. | ISO |
| B. | WTO |
| C. | GATT |
| D. | SQC |
| Answer» A. ISO | |
| 14. |
SQC is ______________ |
| A. | Statistical quality control |
| B. | Standards for quality control |
| C. | Statistical quality chart |
| D. | Standards fof quality control |
| Answer» A. Statistical quality control | |
| 15. |
SQC was introduced in___________________ |
| A. | 1924 |
| B. | 1925 |
| C. | 1934 |
| D. | 1935 |
| Answer» A. 1924 | |
| 16. |
______________provides managers and technologists with regular and uptodate feedback regarding the overall effectiveness of their own sphere of operation |
| A. | Evaluation of subcontractor |
| B. | Quality audit |
| C. | Quality circle |
| D. | Quality monitor |
| Answer» D. Quality monitor | |
| 17. |
CMT is _____________ |
| A. | Cut make trim |
| B. | Cutting manufacturing trimming |
| C. | Costing materials and trims |
| D. | Clothing machineries and textiles |
| Answer» A. Cut make trim | |
| 18. |
_______________denotes non conformance , unperfection in an entity |
| A. | AQL |
| B. | 4 point system |
| C. | Sample |
| D. | Defect |
| Answer» D. Defect | |
| 19. |
________________is a defect that is not likely to reduce materially the usability of the unit of product for its intended purpose |
| A. | Defect |
| B. | Major defect |
| C. | Critical defect |
| D. | Minor defect |
| Answer» D. Minor defect | |
| 20. |
__________is a defect, other than critical, that is likely to result in failure or to reduce materially the usability of the product for its intended purpose |
| A. | Sample defect |
| B. | Minor defect |
| C. | Yarn defect |
| D. | Major defect |
| Answer» D. Major defect | |
| 21. |
_____________is a defect that judgment and experience indicate is likely to result in hazardous or unsafe condition for individuals, using, maintaining or depending upon the product |
| A. | Material defect |
| B. | fabric defect |
| C. | major defect |
| D. | critical defect |
| Answer» D. critical defect | |
| 22. |
_____________ is the maximum allowable percent defective, for sampling inspection purpose can be considered satisfactory as a process average |
| A. | AQL |
| B. | ACL |
| C. | 4 points |
| D. | Yarn indent |
| Answer» A. AQL | |
| 23. |
The width of fabric in inches is called as _____________ |
| A. | Dia |
| B. | GSM |
| C. | Gauge |
| D. | Bagging |
| Answer» A. Dia | |
| 24. |
______________denotes dimensional stability |
| A. | Strength |
| B. | Permeability |
| C. | Crimp |
| D. | shrinkage |
| Answer» D. shrinkage | |
| 25. |
_____________ is grams per square meter |
| A. | GSM |
| B. | GPS |
| C. | GPM |
| D. | GPSM |
| Answer» A. GSM | |
| 26. |
Tolerance level in case of GSM is______________ |
| A. | + or -5 gms |
| B. | + or -6 gms |
| C. | + or -7 gms |
| D. | + or -10 gms |
| Answer» A. + or -5 gms | |
| 27. |
The load or force required for breaking the material |
| A. | Wedding strength |
| B. | Breaking strength |
| C. | Bond strength |
| D. | Batting strength |
| Answer» B. Breaking strength | |
| 28. |
Loss of color from a dyed fabric occurred when immersed in water, dry cleaning solvent or other liquid medium |
| A. | Color bleading |
| B. | Color staining |
| C. | Crocking |
| D. | Color fly |
| Answer» A. Color bleading | |
| 29. |
The dried color transfer from a colored fabric to another surface by abrasive action is called as _________ |
| A. | Color fly |
| B. | Batching up |
| C. | Crocking |
| D. | Puckering |
| Answer» C. Crocking | |
| 30. |
Crinckled effect found along the seam of a garment due to differential stretch properties of two different fabric is called as _________ |
| A. | Puckering |
| B. | Regged seam |
| C. | Bar tacking |
| D. | Batching up |
| Answer» A. Puckering | |
| 31. |
Small fiber balls are formed on the surface of fabric due to abrasion action |
| A. | Pilling |
| B. | Crocking |
| C. | Bagging |
| D. | Crimp |
| Answer» A. Pilling | |
| 32. |
__________ occurs due to lose stitch density |
| A. | Grin seam |
| B. | Regged seam |
| C. | Staggered seam |
| D. | Puckered seam |
| Answer» A. Grin seam | |
| 33. |
_________ is a knitting defect due to excessive thickness of yarn |
| A. | Dropped stitches |
| B. | Flower line |
| C. | Run |
| D. | Batching up |
| Answer» D. Batching up | |
| 34. |
The color smeared out during printing is called as ______ |
| A. | Color smear |
| B. | Out of register |
| C. | Streaks |
| D. | Patches |
| Answer» A. Color smear | |
| 35. |
__________ is the test that is of use with knitted fabrics to determine its strength |
| A. | GSM |
| B. | Bursting strength |
| C. | Tear strength |
| D. | Stiffness test |
| Answer» B. Bursting strength | |
| 36. |
Inspection done in between any operation and a process is known as |
| A. | Inproinspection |
| B. | Screening |
| C. | Final inspection |
| D. | Pre final inspection |
| Answer» A. Inproinspection | |
| 37. |
_________ is done in inspection center(IC) due to excessive defect percentage in the already inspected lot |
| A. | 100% inspection |
| B. | Mid inspection |
| C. | Pre final inspection |
| D. | In process inspection |
| Answer» A. 100% inspection | |
| 38. |
___________ inspection is done prior to final inspection |
| A. | Pre final inspection |
| B. | Mid inspection |
| C. | In process inspection |
| D. | Screening |
| Answer» A. Pre final inspection | |
| 39. |
_________ are the tiny holes that appear after rectification or rework of the defective portion of a garment |
| A. | Needle hole |
| B. | Needle mark |
| C. | Needle line |
| D. | Pilling |
| Answer» A. Needle hole | |
| 40. |
The color printed not in a proper position during printing is called as ___________ |
| A. | Color smear |
| B. | Out of register |
| C. | Scrimp |
| D. | Specks |
| Answer» B. Out of register | |
| 41. |
The printing pattern is broken due to crease in fabric during printing __________ |
| A. | Scrimp |
| B. | Calibration |
| C. | Streaks |
| D. | Patches |
| Answer» A. Scrimp | |
| 42. |
The lack of affinity to dyes at particular portions of fabric will result in _______________ |
| A. | Shapes |
| B. | Patches |
| C. | Specks |
| D. | Bagging |
| Answer» B. Patches | |
| 43. |
_______________is the pre production process of separating(sectioning, carving) a spread into garment parts that are precise size and shapes of pattern pieces on a marker |
| A. | Cutting |
| B. | Stitching |
| C. | Marker making |
| D. | Spreading |
| Answer» A. Cutting | |
| 44. |
___________cutting is the most effective with harder sheet materials, including leather and plastics |
| A. | Laser cutting |
| B. | Plasma cutting |
| C. | Water jet cutting |
| D. | Ultrasonic cutting |
| Answer» C. Water jet cutting | |
| 45. |
In the case of _____________cutting machine, in several plies are cut , the accuracy is not perfect as it is a V cut rather than straight line |
| A. | Laser cutting |
| B. | Plasma cutting |
| C. | Water jet cutting |
| D. | Ultrasonic cutting |
| Answer» A. Laser cutting | |
| 46. |
Variation that exceeds tolerances or donot meet specifications are called ___________ |
| A. | Product variation |
| B. | Process variation |
| C. | Defects |
| D. | Consistency |
| Answer» C. Defects | |
| 47. |
_____________defects prevents usability of performance |
| A. | Normal |
| B. | Critical |
| C. | Major |
| D. | Minor |
| Answer» B. Critical | |
| 48. |
_________may effect usability or interfere with performance |
| A. | Normal defect |
| B. | Critical defect |
| C. | Major defect |
| D. | Minor defect |
| Answer» C. Major defect | |
| 49. |
______________defect will not effect usability |
| A. | Normal defect |
| B. | Critical defect |
| C. | Major defect |
| D. | Minor defect |
| Answer» D. Minor defect | |
| 50. |
If the quality of a garment is evaluated as a acceptable it is_________ |
| A. | Low quality |
| B. | Medium quality |
| C. | Seconds |
| D. | First quality |
| Answer» D. First quality | |
Done Studing? Take A Test.
Great job completing your study session! Now it's time to put your knowledge to the test. Challenge yourself, see how much you've learned, and identify areas for improvement. Don’t worry, this is all part of the journey to mastery. Ready for the next step? Take a quiz to solidify what you've just studied.