

McqMate
These multiple-choice questions (MCQs) are designed to enhance your knowledge and understanding in the following areas: Computer Science Engineering (CSE) , Electrical Engineering , Bachelor of Science in Computer Science TY (BSc CS) , Bachelor of Science in Information Technology FY (BSc IT) , Bachelor of Science in Information Technology SY (BSc IT) .
101. |
HTTP client requests by establishing a __________ connection to a particular port on the server. |
A. | user datagram protocol |
B. | transmission control protocol |
C. | broader gateway protocol |
D. | none of the mentioned |
Answer» B. transmission control protocol |
102. |
In HTTP pipelining |
A. | multiple http requests are sent on a single tcp connection without waiting for the corresponding responses |
B. | multiple http requests can not be sent on a single tcp connection |
C. | multiple http requests are sent in a queue on a single tcp connection |
D. | none of the mentioned |
Answer» A. multiple http requests are sent on a single tcp connection without waiting for the corresponding responses |
103. |
FTP server listens for connection on port number |
A. | 20 |
B. | 21 |
C. | 22 |
D. | 23 |
Answer» B. 21 |
104. |
In FTP protocol, client contacts server using ____ as the transport protocol. |
A. | transmission control protocol |
B. | user datagram protocol |
C. | datagram congestion control protocol |
D. | stream control transmission protocol |
Answer» A. transmission control protocol |
105. |
In which mode FTP, the client initiates both the control and data connections. |
A. | active mode |
B. | passive mode |
C. | both (a) and (b) |
D. | none of the mentioned |
Answer» B. passive mode |
106. |
The file transfer protocol is built on |
A. | data centric architecture |
B. | service oriented architecture |
C. | client server architecture |
D. | none of the mentioned |
Answer» C. client server architecture |
107. |
In file transfer protocol, data transfer can be done in |
A. | stream mode |
B. | block mode |
C. | compressed mode |
D. | all of the mentioned |
Answer» D. all of the mentioned |
108. |
Ethernet frame consists of |
A. | mac address |
B. | ip address |
C. | both (a) and (b) |
D. | none of the mentioned |
Answer» A. mac address |
109. |
What is stat frame delimeter (SFD) in ethernet frame? |
A. | 10101010 |
B. | 10101011 |
C. | 00000000 |
D. | 11111111 |
Answer» B. 10101011 |
110. |
What is autonegotiation? |
A. | a procedure by which two connected devices choose common transmission parameters |
B. | a security algorithm |
C. | a routing algorithm |
D. | none of the mentioned |
Answer» A. a procedure by which two connected devices choose common transmission parameters |
111. |
Ethernet in metropolitan area network (MAN) can be used as |
A. | pure ethernet |
B. | ethernet over sdh |
C. | ethernet over mpls |
D. | all of the mentioned |
Answer» D. all of the mentioned |
112. |
A point-to-point protocol over ethernet is a network protocol for |
A. | encapsulating ppp frames inside ethernet frames |
B. | encapsulating ehternet framse inside ppp frames |
C. | for security of ethernet frames |
D. | for security of ppp frames |
Answer» A. encapsulating ppp frames inside ethernet frames |
113. |
High speed ethernet works on |
A. | coaxial cable |
B. | twisted pair cable |
C. | optical fiber |
D. | none of the mentioned |
Answer» C. optical fiber |
114. |
The maximum size of payload field in ethernet frame is |
A. | 1000 bytes |
B. | 1200 bytes |
C. | 1300 bytes |
D. | 1500 bytes |
Answer» D. 1500 bytes |
115. |
What is interframe gap? |
A. | idle time between frames |
B. | idle time between frame bits |
C. | idle time between packets |
D. | none of the mentioned |
Answer» A. idle time between frames |
116. |
An ethernet frame that is less than the IEEE 802.3 minimum length of 64 octets is called |
A. | short frame |
B. | run frame |
C. | mini frame |
D. | man frame |
Answer» B. run frame |
117. |
Which of this is not a constituent of residential telephone line? |
A. | a high-speed downstream channel |
B. | a medium-speed downstream channel |
C. | a low-speed downstream channel |
D. | none of the mentioned |
Answer» C. a low-speed downstream channel |
118. |
In DSL telco provides these services |
A. | wired phone access |
B. | isp |
C. | all of the mentioned |
D. | none of the mentioned |
Answer» C. all of the mentioned |
119. |
The function of DSLAM is |
A. | convert analog signals into digital signals |
B. | convert digital signals into analog signals |
C. | amplify digital signals |
D. | none of the mentioned |
Answer» A. convert analog signals into digital signals |
120. |
The following term is not associted with DSL |
A. | dslam |
B. | co |
C. | splitter |
D. | cmts |
Answer» D. cmts |
121. |
HFC contains |
A. | fibre cable |
B. | coaxial cable |
C. | both of the mentioned |
D. | none of the mentioned |
Answer» C. both of the mentioned |
122. |
Choose the statement which is not applicable for cable internet access |
A. | it is a shared broadcast medium |
B. | it includes hfcs |
C. | cable modem connects home pc to ethernet port |
D. | analog signal is converted to digital signal in dslam |
Answer» D. analog signal is converted to digital signal in dslam |
123. |
Among the optical-distribution architectures that is essentially switched ehternet is |
A. | aon |
B. | pon |
C. | non |
D. | none of the mentioned |
Answer» A. aon |
124. |
StarBand provides |
A. | ftth internet access |
B. | cable access |
C. | telephone access |
D. | satellite access |
Answer» D. satellite access |
125. |
Home Access is provided by |
A. | dsl |
B. | fttp |
C. | cable |
D. | all of the mentioned |
Answer» D. all of the mentioned |
126. |
ONT is connected to splitter using |
A. | high speed fibre cable |
B. | hfc |
C. | optical cable |
D. | none of the mentioned |
Answer» C. optical cable |
127. |
The sharing of a medium and its link by two or more devices is called _______ |
A. | fully duplexing |
B. | multiplexing |
C. | both a and b |
D. | none of the mentioned |
Answer» B. multiplexing |
128. |
Multiplexing is used in _______ |
A. | packet switching |
B. | circuit switching |
C. | data switching |
D. | none of the mentioned |
Answer» B. circuit switching |
129. |
Which multiplexing technique transmits digital signals ? |
A. | fdm |
B. | tdm |
C. | wdm |
D. | none of the mentioned |
Answer» B. tdm |
130. |
If there are n signal sources of same data rate than TDM link has _______ slots |
A. | n |
B. | n/2 |
C. | n*2 |
D. | 2^n |
Answer» A. n |
131. |
If link transmits 4000frames per second, and each slot has 8 bits,the transmission rate of circuit this TDM is |
A. | 32kbps |
B. | 500bps |
C. | 500kbps |
D. | none of the mentioned |
Answer» A. 32kbps |
132. |
The state when dedicated signals are idle are called |
A. | death period |
B. | poison period |
C. | silent period |
D. | none of the mentioned |
Answer» C. silent period |
133. |
Multiplexing can provide |
A. | efficiency |
B. | privacy |
C. | anti jamming |
D. | both a and b |
Answer» D. both a and b |
134. |
In TDM, the transmission rate of the multiplexed path is usually _______ the sum of the transmission rates of the signal sources. |
A. | greater than |
B. | lesser than |
C. | equal to |
D. | equal to or greater than |
Answer» A. greater than |
135. |
In TDM, slots are further divided into |
A. | seconds |
B. | frames |
C. | packets |
D. | none of the mentioned |
Answer» B. frames |
136. |
Multiplexing technique that shifts each signal to a different carrier frequency |
A. | fdm |
B. | tdm |
C. | either a or b |
D. | both a and b |
Answer» A. fdm |
137. |
Physical or logical arrangement of network is |
A. | topology |
B. | routing |
C. | networking |
D. | none of the mentioned |
Answer» A. topology |
138. |
In this topology there is a central controller or hub |
A. | star |
B. | mesh |
C. | ring |
D. | bus |
Answer» A. star |
139. |
This topology requires multipoint connection |
A. | star |
B. | mesh |
C. | ring |
D. | bus |
Answer» D. bus |
140. |
Data communication system spanning states, countries, or the whole world is |
A. | lan |
B. | wan |
C. | man |
D. | none of the mentioned |
Answer» B. wan |
141. |
Data communication system within a building or campus is |
A. | lan |
B. | wan |
C. | man |
D. | none of the mentioned |
Answer» A. lan |
142. |
Expand WAN |
A. | world area network |
B. | wide area network |
C. | web area network |
D. | none of the mentioned |
Answer» B. wide area network |
143. |
A local telephone network is an example of a _______ network |
A. | packet switched |
B. | circuit switched |
C. | both of the mentioned |
D. | none of the mentioned |
Answer» B. circuit switched |
144. |
Most packet switches use this principle |
A. | stop and wait |
B. | store and forward |
C. | both of the mentioned |
D. | none of the mentioned |
Answer» B. store and forward |
145. |
If there are N routers from source to destination, total end to end delay in sending packet P(L->number of bits in the packet R-> transmission rate) |
A. | n |
B. | (n*l)/r |
C. | (2n*l)/r |
D. | l/r |
Answer» B. (n*l)/r |
146. |
Method(s) to move data through a network of links and switches |
A. | packet switching |
B. | circuit switching |
C. | line switching |
D. | both a and b |
Answer» D. both a and b |
147. |
The resources needed for communication between end systems are reserved for the duration of session between end systems in ________ |
A. | packet switching |
B. | circuit switching |
C. | line switching |
D. | frequency switching |
Answer» B. circuit switching |
148. |
As the resouces are reserved between two communicating end systems in circuit switching, this is achieved |
A. | authentication |
B. | guaranteed constant rate |
C. | reliability |
D. | store and forward |
Answer» B. guaranteed constant rate |
149. |
What is internet? |
A. | a single network |
B. | a vast collection of different networks |
C. | interconnection of local area networks |
D. | none of the mentioned |
Answer» B. a vast collection of different networks |
150. |
To join the internet, the computer has to be connected to a |
A. | internet architecture board |
B. | internet society |
C. | internet service provider |
D. | none of the mentioned |
Answer» C. internet service provider |
Done Studing? Take A Test.
Great job completing your study session! Now it's time to put your knowledge to the test. Challenge yourself, see how much you've learned, and identify areas for improvement. Don’t worry, this is all part of the journey to mastery. Ready for the next step? Take a quiz to solidify what you've just studied.