When load is removed, .......motor will run at the highest speed.

Related MCQs

• A 4 pole, 500V shunt motor has 720 wave connected conductors on its armature. The full load armature current is 60A and flux per pole is 0.03Wb. The armature resistance is 0.2Ω and contact drop per brush is 1V. What is the full load speed of the motor?
• A 3-phase , 50 Hz , 4-pole squirrel cage induction motor has its stator rewound for 6 poles without any alternations in the rotor. The motor would now run at a speed
• A DC shunt motor is driving a constant torque load. On inserting an additional resistance in the armature circuit, the speed of the motor will:
• A 4-pole, 3-phase induction motor is running at 4 percent slip at full load. If the speed of the motor is 720 rpm, the supply frequency is
• A DC motor runs at 1725rpm at full load and 1775rpm at no load. The speed regulation is _____.
• A 3-phase, 4-pole induction motor has a no-load slip of 2% when connnected to a 25 Hz source, the no-load speed in rpm is
• A cumulatively compounded motor does not run at dangerous speed at light loads because of the presence of ______.
• The rotor of an induction motor can't run at synchronous speed, if it did so then
• The speed of dc motor is highest on
• A 440V, 20HP, 3phase motor operates at full load, 88% efficiency and 0.65 power factor lagging, the current drawn by motor is