On P.Ѳ. Diagram, start of second phase in the combustion of SI engine is indicated by….

Related MCQs

• Start of second phase in the combustion of SI engine is indicated by
• On P.Ѳ. Diagram, separation of combustion curve from motoring curve in SI engine takes place…
• a six cylinder four stroke petrol engine develops a indicated power of 67.593 KW with indicated mean specific fuel consumption os 0.3kg/Kwh. What would be the mas flow rate of the fuel in kg/hr
• The first phase of combustion in SI engine is named as
• Favourable conditions for combustion are: 1. The presence of combustible mixture 2. Initiation by any means like spark plug is not required 3. Stabilization and propagation of flame in the combustion chamber. Out of these following is correct
• If flame travel from point of ignition upto end of combustion chamber without change in speed, the combustion is called
• what would be the mean effective pressure of the engine if the area of the indicator diagram is 13 cm2 , length of the indicator diagram is of 6cm and spring constant 2.9 bar/cm
• what would be the mean effective pressure of the engine if the area of the positive loop of the indicator diagram is of 5.75 squr cm, area of negative loop of the indicator diagram 0.25 squre cm and the length of the indicator diagrma is of 5.5cm
• brke mean effective pressure and indicated mean effective pressure of an ic engine are 8br and 10 bar resp. the mechanical efficiency of an engine when runnign at 4000 rpm is
• if the brake power and indicated power of an engine are 22.286 KW and 56.589KW, what would be mecanicale efficiency of an engine ………..?