If the Average outgoing Quality is plotted against the Incoming Fraction Defective, the Average Outgoing Quality Limit is the ______________ point.

Related MCQs

• Let p0 be the incoming fraction defective and p1 be the outgoing fraction defective (Assume both p1 and p0 is greater than 0). If rectifying inspection is performed then:
• Inspection of incoming/outgoing items is an example of ______________.
• For an ideal OC curve the probability of acceptance for lot fraction defective less than .01 is ______________.
• The key to quality is to design and build to the requirements and avoid attempts to inspect quality into the product. There is a need, however, to conduct inspections a critical junctures in the assembly process to ensure defective items are identified prior to making a costly interface or concealing a physical attribute that cannot be inspected at a later time. Inspection plan will identify the points at which examinations of processes, materials, or assemblies are required. However, inspection plans normally do not include ______________.
• Lot tolerance percent defective (LTPD) is a level of lot quality specified by the ______________.
• The thickness of aluminum sheet is specified to be of 6±2 mm. The Upper Specification Limit and Lower Specification Limit for the sheet are:
• When data is plotted on the control charts, the data is of two types: R and -bar. The R data represent points of a ______________ while the X-bar data represent points of a (n) ______________.
• Juran's Quality trilogy emphasizes the roles of quality planning, quality control and ______________
• A quality audit is a powerful tool in any quality improvement program. For a project that is starting a quality improvement program, the initial audit is used to ______________.
• Each project needs a quality program plan to define the parameters of the overall approach to meeting quality requirements. As a minimum, the quality program plan addresses ______________.