In which pump is the liquid in contact with both the sides of the plunger          

Related MCQs

• A hydraulic press has a ram of 15 cm diameter and plunger of 1.5 cm. It is required to lift a weight of 1 tonne. The force required on plunger is equal to
• A vertical wall is subjected to a pressure due to one kind of liquid, on one of its sides. The total pressure on the wall per unit length is (where w = Specific weight of liquid, and H = Height of liquid)
• Power operated pump in which only both sides engage the fluid displacement is called
• When a vertical wall is subjected to pressures due to liquid on both sides, the resultant pressure is the __________ of the two pressures.
• A glass tube of small diameter (d) is dipped in fluid. The height of rise or fall in the tube given by (where w = Specific weight of liquid, α = Angle of contact of the liquid surface, and σ = Surface tension)
• The ratio of quantity off liquid discharged per second from the pump to the quantity of liquid passing per second through the impeller is known as
• The loss of head due to viscosity for laminar flow in pipes is (where d = Diameter of pipe, l = Length of pipe, v = Velocity of the liquid in the pipe, μ = Viscosity of the liquid, and w = Specific weight of the flowing liquid)
• Specific speed of a pump is the speed at which a pump runs when
• Which pump is the most efficient centrifugal pump?
• The specific speed from a centrifugal pump indicates that the pump is